* Initial "group members assume state" implementation for ZHA
* Remove left-over debug flag (where polling was disabled)
* Implement _send_member_assume_state_event() method and also use after turn_off
* Only assume updated arguments from service call to group
* Make code more readable and change checks slightly
* Move "send member assume state" events to LightGroup on/off calls
* Include new config option in tests
* Check that member is available before updating to assumed state
* Lower "update group from child delay" for debouncer to basically 0 when using assumed member state
* Allow "child to group" updates regardless of config option
This is not needed, as group members will not update their state, as long as they're transitioning. (If a group transitions, it also sets its members to transitioning mode)
This fixes multiple issues. Previously, the state of a group was completely wrong when:
- turn on group with 10 second transition
- turn on members individually
- turn off members individually
- group state would not update correctly
* Move "default update group from child delay" constant
* Change to new constant name in test
* Also update fan test to new constant name
* Decrease "update group from child delay" to 10ms
In my testing, 0.0 also works without any issues and correctly de-bounces child updates when using the "assume state option".
This is just for avoiding multiple state changes when changing the group -> children issue individual updates.
With 2 children in a group and delay 0, both child updates only cause one group re-calculation and state change.
0.01 (10ms) should be plenty for very slow systems to de-bounce the update (and in the worst case, it'll cause just another state change but nothing breaks)
* Also implement "assuming state" for effect
Not sure if anybody even uses this, but this one is a bit special because the effect is always deactivated if it's not provided in the light.turn_on call.
* Move shortened delay for "assuming members" to a constant
* Add basic test to verify that group members assume on/off state
* Move _assume_group_state function declaration out of async_added_to_hass
* Fix rare edge-case when rapidly toggling lights and light groups at the same time
This prevents an issue where either the group transition would unset the transition flag or the single light would unset the group transition status midst-transition.
Note: When a new individual transition is started, we want to unset the group flag, as we actually cancel that transition.
* Check that effect list exists, add return type
* Re-trigger CI due to timeout
* Increase ASSUME_UPDATE_GROUP_FROM_CHILD_DELAY slightly
The debouncer is used when updating group member states either by assuming them (in which case we want to barely have any delay), or between the time we get the results back from polling (where we want a slightly longer time).
As it's not easily possible to distinguish if a group member was updated via assuming the state of the group or by the polling that follows, 50 ms seems to be a good middle point.
* Add debug print for when updating group state
* Fix issues with "off brightness" when switching between group/members
This fixes a bunch of issues with "off brightness" and passes it down to the members correctly.
For example, if a light group is turned off with a transition (so bulbs get their level set to 1), this will also set the "off brightness" of all individual bulbs to the last level that they were at.
(It really fixes a lot of issues when using the "member assume group state" option. It's not really possible to fix them without that.)
Furthermore, issues where polling was previously needed to get the correct state after "playing with transitions", should now get be resolved and get correct state when using the "members assume group state" option.
Note: The only case which still can't be fixed is the following:
If individual lights have off_with_transition set, but not the group, and the group is then turned on without a level, individual lights might fall back to brightness level 1 (<- at least now shows correctly in UI even before polling).
Since all lights might need different brightness levels to be turned on, we can't use one group call. But making individual calls when turning on a ZHA group would cause a lot of traffic and thereby be counter-productive.
In this case, light.turn_on should just be called with a level (or individual calls to the lights should be made).
Another thing that was changed is to reset off_with_transition/off_brightness for a LightGroup when a member is turned on (even if the LightGroup wasn't turned on using its turn_on method).
off_with_transition/off_brightness for individual bulbs is now also turned off when a light is detected to be on during polling.
Lastly, the waiting for polled attributes could previously cause "invalid state" to be set (so mid-transition levels).
This could happen when group and members are repeatedly toggled at similar times. These "invalid states" could cause wrong "off brightness" levels if transitions are also used.
To fix this, we check after waiting for the polled attributes in async_get_state to see if a transition has started in the meanwhile. If so, the values can be discarded. A new poll will happen later and if using the "members assume group state" config option, the values should already be correct before the polling.
* Enable "group members assume state" config option by default
The config tests are also updated to expect the config option be enabled by default.
For all tests, the config option is generally disabled though:
There are only two group related tests. The one that tests this new feature overrides the config option to be enabled anyway.
The other tests works in a similar way but also "sends" attribute reports, so we want to disable the feature for that test.
(It would also run with it enabled (if the correct CHILD_UPDATE value is patched), but then it would test the same stuff as the other test, hence we're disabling the config option for that test.)
* Moved color commands to a new ``async_handle_color_commands`` method
* Fixed tests
* Fix brightness jumping around during transitions
* Add config option to disable "Enhanced brightness slider during light transition"
* fix polling currentSaturation
* Guard light groups against enhanced current hue
* Use XY if all group members do not support HS
* add config option to always prefer XY color mode
* use correct enum
* remove periods
* Add ZHA config option for "enhanced light transition from an off-state"
* Default option to disabled
* Always disable "enhanced light transition" for ZHA LightGroups
* Rename _enhanced_light_transition to _zha_config_enhanced_light_transition
* Remove LightGroup check, as config option always disables for groups
* Remove duplicated line
* Remove duplicated line
* Move ZHA config transition line below other config line
* Renamed comments of renamed variable in tests
color_provided_while_off -> new_color_provided_while_off
* Enable "enhanced light transitions" for testing
* Add USB discovery support to ZHA
* dry
* dry
* Update homeassistant/components/zha/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* black
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Start gateway using new zigpy init.
Update config entry data import.
Use new zigpy startup.
Fix config entry import without zha config section.
Auto form Zigbee network.
* Migrate config entry.
* New ZHA config entry flow.
Use lightweight probe() method for ZHA config entry validation when
available. Failback to old behavior of setting up Zigpy app if radio lib
does not provide probing.
* Clean ZHA_GW_RADIO
* Don't import ZHA device settings.
* Update config flow tests.
* Filter out empty manufacturer.
* Replace port path with an by-id device name.
* Rebase cleanup
* Use correct mock.
* Make lint happy again
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use executor pool for IO
* Address comments.
Use AsyncMock from tests.
* Use core interface to test config flow.
* Use core interface to test config_flow.
* Address comments. Use core interface.
* Update ZHA dependencies.
* Schema guard
* Use async_update_entry for migration.
* Don't allow schema extra keys.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
puddly