* Added ability to control when the on command is sent.
* Changed to allow only brightness command
* Code cleanup
* Added test cases for on command mode.
* Added addition test
* Changed brightness options to lower case.
* Fixed case of default value
* Remove default
* OwnTracks work. Beacon logic and testcases
The existing test cases don't really make clear what is being
tested and the iBeacon / Region / Zone / Tracker thing is all
a bit confused.
I'm distinguishing a fixed-place beacon used to trigger entrance
into an HA zone (as a Region Beacon) from a beacon affixed to a
portable or mobile object (as a Mobile Beacon). The behaviors
and test cases for those usages should be different. A Region Beacon
will be named the same as a Home Assistant Zone and seeing an event
from that beacon should trigger a device tracker update related
to that zone. It would be appropriate, though unnecessary, to
configure the Region Beacon with the GPS coordinates of its static
physical location.
A Mobile Beacon is not named after any HA Zone and seeing the beacon
triggers an update in HA setting the location of the beacon to the
current device_tracker location. In this way, when my_phone sees
the beacon on my_keys, the location of my_keys is set to where
my_phone is. And when my_phone stops seeing my_keys, my_keys location
is the location of my_phone the last time it saw them.
A Mobile Beacon's GPS information should be ignored because it's
almost certain to be incorrect because the beacon moves. In fact,
beacons typcially come configured with lat/lon as 0.0/0.0 so using
the location of the beacon in an update has a nasty habit of
setting you and your keys on the bottom of the Atlantic Ocean.
Leave message handling is changed to treat mobile beacons
differently from region beacons and gps regions.
active beacons should be a set. you shouldn't end up
with multiple "active" entries for the same beacon. Let's
enforce that with the correct data structure.
Added test for real-world bug that is fixed.
A series of mobile beacon and region beacon
enter and leave events could cause a mobile
beacon to stick to the tracking device even
though it had tracked through a "leave" event.
Changed two tests to look at the size
of the 'mobile_beacons_active' structure rather
than at the object which will allow this test
to work with any sort of list, set, etc.
* Removing excess logging and unnecessary try catch.
From review on PR #10183 I've removed some info logging
that was unnecessary and I've made the suggested changes
to an if block and a try/catch.
* Add unit test for hddtemp sensor.
* Remove sample fixture and include it in the code.
* Add test to raise coverage.
* Fix bug when host is not reachable.
* Minor code cleanups.
* More code cleanups.
* Add support for different display currencies in CoinMarkerCap sensor.
* Add test for CoinMarketCap sensor.
* Add test dependency to gen_requirements_all.
* Fix review comments: use string formatting and less string case chanes.
* Trend sensor now uses linear regression to calculate trend
* Added numpy to trend sensor test requirements
* Added trendline tests
* Trend sensor now has max_samples attribute
* Trend sensor uses utcnow from HA utils
* Trend sensor now completes setup in async_added_to_hass
* Fixed linter issues
* Fixed broken import
* Trend tests make use of max_samples
* Added @asyncio.coroutine decorator to trend update callback
* Update trend.py
* Add Google Domains component
* Fixes for hound
* Add Google Domains tests
* Fixes for hound
* Clean up Google Domains
* Add timeout to Google Domains
* Remove whitespace from blank lines
* Update google_domains.py
* Update google_domains.py
* Initial revision of fail2ban sensor
* Verified working, added tests
* Re-factored code so that log reading isn't called for each sensor
* Lint fixes
* Removed errant reset of last ban, added test to verify bans persist through update
* Removed for loop in read_log and replaced with regex per review request
* Refactored update to use current ban array for last ban state
- also was missing return False in timer for default behavior
* Removed CONF_SCAN_INTERVAL from PLATFORM_SCHEMA.extend
- renamed DEFAULT_SCAN_INTERVAL to SCAN_INTERVAL
* SCAN_INTERVAL changed to timedelta
* Force travis rebuild (last build timed out)
* Using compiled regex now
* Test including extra data on a no data trigger
* Match any dicts for default schema for event data
* Fix indentation
* Only check schema if one was configured
* Change persistent notification to avoid long text in entity state
* Tests for changed persistent notification
* Persistent notification state
* Test for component state
* Extended Ring DoorBell to support camera playback and wifi sensors
* Bump python-ringdoorbell to version 0.1.6
* Support to camera playback via ffmpeg
* Extended ringdoorbell sensors to report WiFi attributes
* Extended unittests
* Makes lint happy
* Added support to stickup cameras and fixed logic
* Fixed unittests for stickup cameras
* Makes lint happy
* Refactored attributions and removed extra refresh method.
* added implementation for monoprice 6-zone amplifier. This implementation is based on and very similar to russoun_rnet implementaion
* updated comments and cleaned up code
* updated comments and cleaned up code
* added unit tests
* removed 'name' attribute from platform schema.
* added monoprice.py to .coveragerc
* fixed lint
* fixed lint errors
* fixed lint errors
* added monoprice to requirements_all.txt
* fixed lint errors again
* implemented change requests
* fixed lint error
* added exception handling to setup_platform()
* replaced catchall with SerialException only
* added myself to CODEOWNERS
* fixed weird merge to CODEOWNERS
* http: Add headers key to json[_message]
* Add google_assistant component
This component provides API endpoints for the Actions on Google Smart
Home API to interact with Google Assistant.
* google_assistant: Re-add fan support
* google_assistant: Fix Scene handling
- The way I originally wrote the MAPPING_COMPONENT and the way it's actual
used changed so the comment was updated to match that.
- Use const's in more places
- Handle the ActivateScene command correctly
* google_assistant: Fix flakey compare test
Was failing on 3.4.2 and 3.5, this is more correct anyway.
* google_assistant: Use volume attr for media_player
* Cloud: connect to cloud
* Fix tests in py34
* Update warrant to 0.5.0
* Differentiate errors between unknown handler vs exception
* Lint
* Respond to cloud message to logout
* Refresh token exception handling
* Swap out bare exception for RuntimeError
* Add more tests
* Fix tests py34
* Added uptime sensor for homeassistant
* Fixed pylint and flake8 errors
* Made requested changes from PR
- Fixed stale docstrings
- Changed default state to None
- Added ability for user to use hours or days
* Fixed typo
* Added unit_of_measurement check to test
* Converted to async
- Changed tests to work with async
* Minor updates
* Added TODO to illustrate my intentions
* Resolved linting issue
* Resolved bool or file validation and updated tests
The tests have been updated to include mocks to assert a temp
ca cert exists as it should for the positive tests with an
additional negative test for a file not existing being tested.
* Resolved flake8 linting issues (test docstrings)
* Expose time module in Python Scripts
* Make dt_util available in Python Scripts
* Limit methods in time module
* Add time.mktime
* Limit access to datetime
* Add warning to time.sleep
* Lint
* fix for LocationParseError in netgear platform
* added unit tests for get_scanner()
* fixed houndci-bot warnings
* fixed lint warnings
* fixed lint warnings
* fixed broken test
* removed guard clause from netgear.py
removed all discovery related code from device_tracker
removed unnecessary unit test
* removed discovery related tests
* removed unused import
* removed unused import
* Initializing statistics sensor with data from database
* fixed broken test case
* usage of recorder component is now optional, thx to @andrey-git
* added test case for initialize_from_database
* Add recorder purge service
* Recorder test to match purge config
* Removed purge timer, move service handler to setup, add service description file
* Tests for recorder purge service
* Recorder purge timer rework, add purge service parameter, tests
* Purge service schema change
* Service description change value range
* First cleanup
* Fix name of config
