* Use EntityFeature in melcloud
* Use EntityFeature in mystrom
* Use EntityFeature in mysensors
* Use EntityFeature in myq
* Use EntityFeature in mpd
* Use EntityFeature in monoprice
* Use EntityFeature in moehlenhoff_alpha2
* Use EntityFeature in modern_forms
* Use EntityFeature in modbus
* Use EntityFeature in melissa
* Use EntityFeature in mediaroom
* Use EntityFeature in maxcube
* Use EntityFeature in manual_mqtt
* Fix maxcube tests
* Revert "Use EntityFeature in modbus"
This reverts commit 56cf9d900d71cdb1d39d20bde9a78ba6aef560a7.
* Revert "Use EntityFeature in myq"
This reverts commit 44a31b1a03b4ca23a65d600a2f002f47e80cee73.
* Revert "Use EntityFeature in mystrom"
This reverts commit 7260ee0384ff46426c919e65b3725200f5677b6a.
* Revert "Revert "Use EntityFeature in modbus""
This reverts commit 916a612a6091221359aca8570a76eb7a03dbce20.
* Revert "Revert "Use EntityFeature in myq""
This reverts commit a6be42fa1762ea3ab66f97a89b254e7d2ba76a33.
* Updated precision to follow the tenths, halves, whole notation used by
other home assistant climate modules. Added the precision @property so
that home assistant can handle this rounding in the frontend, rather
than in the _async_read_register() method.
* Fixed a pylinter error for periods in user-facing log messages, and
updated `precision` defaults in components/modbus/__init__.py to be
consistent with an error case, using `PRECISION_WHOLE`.
* revert changes to `precision:` configuration variable
instead, the climate `precision()` function will infer whether or not
to display in whole or tenths. halves will be unsupported, which should
be fine.
* re-added missing line that was removed
* revert change to use self._input_type instead of CALL_TYPE_REGISTER_HOLDING
* Rename _update() to update()
A platform neeed a function update(), even though
polling is false, this is due to the service:
homeassistant.update_entity, which calls update()
* Update test harnesss to script testing.
Test homeassistant.update_entity in all platforms.
This call calls update() in the platform to get
a new reading.
* Add reuse parameter.
* Move service call from helper to tests.
* Change run_service_update --> prepare_service_update.
* Remove entity_id parameter.
* Reuse HA constants for serial configuration.
Reusing HA consts reduces the need for translation.
Sort/group constants in const.
* Change const name ATTR_* to CONF_*
* Correct wrong import
* ATTR_* for service and CONF_* for schemas.
* Revert change to service call.
* Rename CONF_TEMPERATURE -> ATTR_TEMPERATURE
Avoid possible division problem in set_temperature.
* Change modbus configuration to new style.
The old (frozen) configuration is still supported, but when detected a big
warning is issued that it will soon be removed. This allows users to change
their configuration at their pace.
Clean configuration SCHEMAs and move common modbus parts
to MODBUS_SCHEMA (renamed from BASE_SCHEMA).
Add BASE_COMPONENT_SCHEMA to ensure common configuration of components.
All component define e.g. NAME, move these to a common schema.
change components (binary_sensor, sensor, switch) to new config
Add test set for modbus itself (old config and discovery_info).
Add test of devices discovery_info configuration
* Update discovery_info configuration for binary_sensor.
* Update discovery_info configuration for sensor.
* Update discovery_info configuration for switch.
* Review comments.
* update due to change in core
* flake8 problem.
* Correct log message.
* add should_poll property.
* Fix polling for Modbus binary sensor
* Fix polling for Modbus sensor
* Fix polling for Modbus switch
* Fix switch.
* Fix pytest errors.
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/modbus.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ToogleEntity -> SwitchEntity and add abastract
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/modbus/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* removed if/else in test.
* Remove other if.
Co-authored-by: Vladimir Zahradnik <vladimir@zahradnik.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Rollback modbus to version 0.107.7
Update manifest to not use async.
Rollback entities to sync version.
Keep newer modifications apart from async.
Rollback __init__ to sync version but keep the new functionality.
add async sub directory
Adding the current (not working) version in a sub directory,
to allow easy sharing with a few alfa testers.
The async version are to be updated to use the serial/tcp already
available instead of the flaky pymodbus version. pymodbus is still
needed to encode/decode the messagess.
Update test cases to reflect sync implementation, but
keep the new functionality like e.g. conftest.py.
* do not publish async version
The async version will be made available in a forked repo, until
it is ready to replace the production code.
* update common test for modbus integration
* remove log messages from modbus setup function.
* Make global method local
* Change parameter name to snake_case
epenet