* Add support for LaunchRequest alexa intent
* Support LaunchRequest for multiple skills
* formatting
* adding tests to cover launch request
* formatting
* Honeywell fixes and improvements
Give the Honeywell device a state ('On', 'Off', etc) that
can be displayed to user and understood by other components.
Previously this was always 'Unknown'. Update also raises a
state_changed event when a new temperature is polled.
These two together fix an issue (#8688) where Honeywell
climate data couldn't be logged in InfluxDB.
* Roll back some changes
These were not necessary to achieve the result I wanted.
* Renamed RoundThermostat's 'device' member for greater clarity
Now called 'client'
* Improve and simplify discovering thermostat mode
Per code review, this is a rather neater way to discover the thermostat mode
* Update tests for compatibility with new component
The tests previously relied upon the update() method being
called in the constructor. This is no longer the case.
* Address formatting review comment
Parens not necessary
* This system mode is not certain to apply to domestic hot water
Moved the mode lookup to only happen on update of radiator devices,
since hot water devices seem to be treated differently and I can't test.
* Clean up remote component
* Don't have device be required in send_command service and method.
* Don't have entity_id be required in the base service schema.
* Don't always add activity in the data dict for a service call.
* Update harmony remote platform according to new service schema.
* Remove not needed properties and attributes from the Kira remote
platform.
* Add send_command method to demo platform.
* Add tests and remove duplicate tests.
* Break out required argument as positional argument
* Fixed issue with routers in bridge mode
- Router in brdige mode apparently don't report all of the stats
- Re-wrote the data_format function so it's a bit easier to follow and able to log keys that aren't supported by a router in a given mode
- Changed config so that it properly ignores conditions when not explicitly listed
- Added tests to check for the above and also to verify we log that a key doesn't exist rather than throwing an exception
* Mistakenly was calling MONITORED_CONDITIONS in data_format
- Changed to be the actual config values to prevent log error
* Update zwave.py to work with updated OpenZwave library
Update zwave.py to work with updated OpenZwave library
* Update zwave.py
* Update zwave.py
* Update to fix garage door openers
Update to fix garage door support for latest version of openzwavelib
* Update to cover.zwave list of states
Update to cover.zwave to provide list of states based on dev version of
openzwave lib
* Some values not saved
* Formatting fix
* Formatting fix
* Variable typo
* Formatting fix
* Formatting
* Variable Update
Variable Update and properties added
* Formatting fixes
* Formatting Fix
* Update test case for door states
* Formatting / Testing process fix
* Formatting
* Formatting / Test Fixes
* Variable rename
* Added members to CoverDevice
* Removed un-needed else
* Formatting
* Formatting
* Variable name changes and const updates
* Changed variable names to cover_state
* Added constains into const.py
* Updated to change the main state on the cover device
* Fixes
* Formatting fixes
* Formatting/Variables
* Formatting
* Variable fixes
* Import update
* Formatting / Variables
* Update test for new states
* Revert state changes
* Test fix
* Variable Fix
* Formatting
* Variable typo
* Missing constant
* Variable fix
* Requested changes
* Added is_opening
* Added is_closing
* Updated test based on changes
* Formatting
* Changed cover_state back to _state
* Formatting and variable fixes
* Test fixes
* Formatting and variable touchup
* Formatting
* Optimizations
* Add new cover features to demo
* Add tests for demo cover closing/opening
* Remove unused STATE_STOPPED
* Add tests for new zwave cover values
* Manual alarm with MQTT control
* Duplicate manual control panel code instead of extending it
* Duplicate manual alarm test as well; modify for manual_mqtt
* Add MQTT-specific tests for manual_mqtt alarm
* Add intent component
* Add intent script component
* Add shopping list component
* Convert Snips to use intent component
* Convert Alexa to use intent component
* Lint
* Fix Alexa tests
* Update snips test
* Add intent support to conversation
* Add API to view shopping list contents
* Lint
* Fix demo test
* Lint
* lint
* Remove type from slot schema
* Add dependency to conversation
* Move intent to be a helper
* Fix conversation
* Clean up intent helper
* Fix Alexa
* Snips to use new hass.components
* Allow registering intents with conversation at any point in time
* Shopping list to register sentences
* Add HTTP endpoint to Conversation
* Add async action option to intent_script
* Update API.ai to use intents
* Cleanup Alexa
* Shopping list component to register built-in panel
* Rename shopping list intent to inlude Hass name
* Enhance python_script to support "_getitem_"
In order to use dict / list structures in python scripts we need
_getitem_ allowed in the RestrictedPython environment. There is a
default_guarded_getitem included with RestrictedPython, which is a
pass through used in the Eval code paths.
* Add tests for dict/list support in python_scripts
* Lint
* Initial support for Google Wifi/OnHub
* Moved state logic to update function of API class
- Throttle added to update
- State logic implementation is cleaner
- Modified tests to work with the new throttle on update
Prometheus (https://prometheus.io/) is an open source metric and alerting
system. This adds support for exporting some metrics to Prometheus, using
its Python client library.
* New service `send_magic_packet` in new component `wake_on_lan`
* fix
* Unit tests for new component wake_on_lan
* Add wakeonlan to tests requirements
* remove wakeonlan from tests requirements and remake the component tests
* remove wakeonlan from tests requirements
* link domain and service names to component
* fix mocking in test_setup_component
* send_magic_packet as coroutine, better use of mock_calls in tests
* fix imports
* review changes
* better async calls
* Update test_wake_on_lan.py
This commit adds support for the set_operation_mode system call to the
generic thermostat component. This enables users to set whether the
thermostat is enabled or not by either setting it to auto or off.
* Remove the need to login on the UPC Connect component
* Remove unnecessary imports
* Update the unit tests for the UPC Connect component
* Fix the "302" error with the UPC Connect component
* Fix a flake8 error
* Update the unit tests for the UPC Connect component
* Add tube_state
Add tube_state sensor
* Final cleanup
* Make corrections
Correct PLATFORM_SCHEMA
* Fix space
* Make test pass
* Correct format of test
Test still failing, don’t understand why
* correct description
* Make test pass
Preferred method below returns None
state = self.hass.states.get('sensor.london_overground')
* Format for hound
* indent
* Make requested changes to test, not working
Test fails with:
AssertionError: assert 0 > 0
where 0 = len([])
Surely I need tube_state.setup_platform ?
* Fixed test
Config was wrong
* Change component name to london_tube
* Update name to london_underground
Make consistent
* cleanup
* Adding done_message to alert
Adding an optional entry to the config that will send a notification when an
alarm goes from on to off.
* Update test_alert.py
* Update test_alert.py
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
* Implement templates for covers
* Fix a few remaining pylint warnings
* Fix hound line-length warnings
* Fix one more hound line-length warning
* Fix quadruple-quotes an line length code-quality issues
* Irrelevant change to retrigger travis due to timeout
* Use volutuous Exclusive to check for mutex condition
* Fix incorrect state check
* Fixed mqtt subscription filter on sys $ topics
* fixed linting issue
* added unit tests for $ topics and changed fix to use re.escape
* merge upstream/dev mqtt unit tests
* Update test_init.py
* Open Hardware Monitor sensor
Platform which is able to connect to the JSON API of Open Hardware Monitor and adds sensors for the devices.
* Remove copyright in header, not needed.
* - Removed old code
- Fixed typo’s in comments
- Removed log spamming
- Removed code that was unnecessary
- Use requests instead of urllib
- Moved sensor update functionality to data handler, to remove unwanted constructor parameters
* Fixed typo in comment
Added tests
* Added default fixture, to stabilize tests
* - Fix for values deeper than 4 levels, no longer relies on fixed level
- Fixed tests
* Removed timer in preference of helper methods
* Moved update functionality back to Entity….
Updated SCAN INTERVAL
* Added timeout to request
Removed retry when Open Hardware Monitor API is not reachable
Fixed naming of sensors
Flow optimalisations
Fixed tests to use states
* Remove unused import
Steve Rhoades