* Add Abode camera controls
* Add tests for camera turn on and off service
* Bump abodepy version
* Bump abodepy version and updates to reflect changes
* Update manifest
Through some testing with the samsungtvws library, it was determined
that the issue is related to the short read timeout (1s). Increasing
the timeout to 10s should solve the issue.
We would connect to the hub via discovery and via setup
around the same time. This put additional load on the hub
which can increase the risk of timeouts.
* Fix SimpliSafe to work with new MFA
* Code review (part 1)
* Input needed from Martin
* Code review
* Code review
* Restore YAML
* Tests
* Code review
* Remove JSON patching in tests
* Add reauth test
* One more reauth test
* Don't abuse the word "conf"
* Update homeassistant/components/simplisafe/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Test coverage
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Refactor cached ZHA channel reads.
If doing a cached ZCL attribute read, do "only_from_cache" read for
battery operated devices only. Mains operated devices will do a network
read in case of a cache miss.
* Use cached attributes for ZHA electrical measurement
* Bump up ZHA zigpy dependency.
Most of the the template platforms would check for
extract_entities failing to extract entities and avoid
setting up a state change listner for MATCH_ALL after
extract_entities had warned that it could not extract
the entities and updates would need to be done manually.
This protection has been extended to all template platforms.
Alter the behavior of extract_entities to return the
successfully extracted entities if one or more templates
fail extraction instead of returning MATCH_ALL
* Switch async_track_state_change to the faster async_track_state_change_event part 4
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
* pylint
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
* Switch to config flow setup
* Add minimal test for config flow
* Add myself as codeowner and address some review concerns
* Address some further review comments
* Switch to integration level config
* Switch to per device config rather than per entity type
* All roller shutters should be added as covers
(there are non lighting types)
* Fixup tests that used invalid packets for platforms
* Avoid variable re-use
* Allow control events on sensors too
That way we get signal level sensors for these too
* Lint correction
* Don't filter sensors from config
Disable sensors from GUI if the entities are not wanted
* Correct usage of ATTR_ instead of CONF_
* Make sure the logging when a new entity is added includes the event
* Introduce Bond Hub concept
* Read Hub version information when setting up entry
* Link entities to Hub using via_device
* Add test to verify created Hub device properties
