* rename xiaomi to xiaomi_aqara
* rename xiaomi vacuum and xiaomi phillips light to xiaomi miio
* update discovery and tests
* style
* update discovery and tests
* Still use Philips as name
* Add HTTP Basic auth to RESTful Switch
* Remove redundant hass passing
* Initialize to current state
The state used to be None until the first periodic poll.
This commit refactors async_update so it can be used during setup as well,
allowing the state to start out with the correct value.
* Refactor turn_on/turn_off device communication
* Remove lint
* Fix Travis errors
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
* flux: fix for when stop_time is after midnight
* flux: fix imports
* flux: add missing check when now is after midnight
* flux: one more try; should fix all use cases now
* flux switch: fix lint
* flux switch: add new tests
* flux switch: fix tests lint
* flux switch: fix tests docstrings
* Updated abodepy version to 0.7.1
* Refactored to use AbodeDevice. Added Abode Lock device.
* Added push updates to abode devices.
* Upgraded to 0.7.2 after finding issue with callbacks.
* Refactored to use AbodeDevice. Added Abode Lock device.
* Added push updates to abode devices.
* Upgraded to 0.7.2 after finding issue with callbacks.
* Bumped version to 0.8.2. Modified code to work with new constants and properties. Added cover and switch.
* Fixed hound violations.
* Updated to 0.8.3 to fix small bug with standby mode. Fixed comment in cover/abode.py.
* Fix lint issues
* Removed excessive logging. Moved device callback registration to async_added_to_hass. Moved abode controller from global into hass data.
* Removed explicit None from dict.get()
* Move device class into the constructor.
* Changed constant name to platforms.
* Changes as requested.
* Removing stray blank line.
* Added blank line of which I'm not sure how it was removed.
* Updated version to 0.9.0. Fixed motion sensor. Added power_switch_meter device type.
* Update abode.py
* fix lint
* Fix and optimize digitalloggers platform
* Fix line length
* Fix hanging indentation
* Add missing docstring
* Add period to end of docstring
* Add second blank line
* Refactor mysensors callback and add validation
* Add mysensors entity class. The mysensors entity class inherits from
a more general mysensors device class.
* Extract mysensors name function.
* Add setup_mysensors_platform for mysensors platforms.
* Add mysensors const schemas.
* Update mysensors callback and add child validation.
* Remove gateway wrapper class.
* Add better logging for mysensors callback.
* Add discover_persistent_devices function.
* Remove discovery in mysensors component setup.
* Clean up gateway storage in hass.data.
* Update all mysensors platforms.
* Add repr for MySensorsNotificationDevice.
* Fix bug in mysensors climate target temperatures.
* Clean up platforms. Child validation simplifies assumptions in
platforms.
* Remove not needed try except statements. All messages are validated
already in pymysensors.
* Clean up logging.
* Add timer debug logging if callback is slow.
* Upgrade pymysensors to 0.11.0.
* Make dispatch callback async
* Pass tuple device_args and optional add_devices
* Also return new_devices as list instead of dictionary.
* Pilight switch: restore last state after restart
This uses the restore_state helper to set the last known state to
pilight switches when the devices are initialized after a HA
restart.
Without this HA forget the state on every restart and needs to be told
the sttae by retoggling the switches. This can cause unwanted effects
as a switch toggling may emit an RF signal.
* Make hound happy
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Remove entity_id generation as requested in review.
* Make hound happy again.
* fix comments
* fix lint
* Add support for Automatic OAuth2 authentication
* Fix async conversion of configurator
* Rename method for async
* Use hass.components to get configurator component
* Fix typo
* Move session data to hidden directory
* Make configurator callback optional
* Add RainMachine switch platform
* Updated requirements_all.txt
* Cleaning up CI and coverage results
* Small update to deal with older pylint
* Fixed small indentation-based error
* Added some more defensive try/except logic around calls
* I'm not a fan of importing a library multiple times :)
* Making PR-requested changes
* Fixed ref to positional parameter
* Attempting to fix broken linting
* Ignoring no-value-for-parameter pylint error
* Xiaomi vacuum as component with switch, sensors and services
- Conversion from switch platform to async component.
- Add services proposed in #8416 to the new component, with shorter names.
- Add sensors for the vacuum robot as a selectable list from `battery`, `state`, `error`, `fanspeed`, `clean_time` and `clean_area` (the state attributes of the switch). The sensors don't poll, but listen to a signal to update the state, the switch fires this signal when updating.
- Assign default icons to sensors and the switch (`mdi:google-circles-group` looks like the robot!)
* path change in requirements_all (from switch platform to component)
* copy pasting is a bad habit
* services to the components services.yaml, modify .coveragerc
* review: use with multiple hosts, fix calls to async_add_devices, fix ranges for services
* `icon_for_battery_level` util method
* Xiaomi vacuum as platform of new component vacuum
- Created new component `vacuum` from a ToggleEntity.
- Add services `turn_on`, `turn_off`, `cleaning_play_pause`, `stop`, `return_to_base`, `locate`, `set_fanspeed` and `send_command`.
- Remove the main switch for the xiaomi vacuum (the toggable main entity is the switch).
- Add `support flags` for the common services
- Assign default icons to sensors and the switch (`mdi:google-circles-group` looks like the robot!)
- Move services descriptions to a yaml file for the new component.
- Update requirements_all.
- Update coveragerc.
* fix coveragerc
* fix battery icon helper to use more icons
* remove sensors, create properties and support flags for custom UI
* cleaning
* updated state_attrs for filtering in UI, renamed platform to simply `xiaomi`
* fix platform rename
* change fanspeed and expose `fanspeed_list` to use speed steps
* minor fixes
- Rename service `start_pause`
- Add 'Error' attribute only if `got_error`.
- Minor changes
* rename state attrs
* rename state attrs
* review changes: cut fan__speed, style changes, remove logging, and more
* add ATTR_COMMAND = 'command' to const
* pop entity_id from service data
* remove property accessor for vacuum object
* lint fix
* fix extra attrs names
* module level functions for calling the services
* params as optional keyword for `send_command`
* params as optional keyword for `send_command`, remove debug logs
* explicit parameters for `set_fan_speed` and `send_command`
* Demo platform for the vacuum component
* vacuum tests for the Demo platform
* some fixes
* don't omit vacuum
* vacuum tests for the Xiaomi platform
* fix test
* fix
* fix xiaomi test
* fix coveragerc
* test send command
* fix coveragerc
* fix string formatting
* The coverage is to low. It need 93% or more
* Add mochad light component
This commit adds a new component to control x10 dimmers/lights with
mochad.
* Create comm_type and address constants
The comm_type and address conf constants are shared between all mochad
devices because they are required information used for configuring a
device. This commit moves the definition into const.py so they're
consistent between all component types.
* make attributes in the fritzdect module easier to process
* remove spaces in attribute names
* move units to separate attributes
* make attributes in the fritzdect module easier to process
* remove spaces in attribute names
* move units to separate attributes
* Use new python formating syntax and attribute constant
* Shorten too long line
* Fix indent
* The gateway configuration accepts a MAC address or a SID value in uppercase already.
The ringtone services accepts the same values now. I hope it will avoid confusion.
* Device support for the new wall switches with neutral lead (ctrl_ln1, ctrl_ln2) added.
* Measurement unit from pressure of weather.v1 fixed.
* Device support for sensor_magnet.aq2 added.
* Device support for sensor_motion.aq2 (motion and lux) added.
* Code reformatted.
* The ringtone service (start/stop) uses the parameter gw_mac instead of gw_sid now.
* Version of the required library updated.
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
* Fix checking result from a modbus transaction
* Add missing decorator
* Added modbus write coil service and added descriptions
* Removed a hiding debug print
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
Andy Castille