Files
core/homeassistant/components
Jean Gauthier aa4a3d8b96 Modifying MTUs acquisition (#20654)
**Description:**

I modified the file because it should not disable a MTU based on voltage or power. If one has programmed a certain amount of MTUs in his Gateway, they should be all visible and show 0W or 0V. 
The problem arises when you have a device that shuts off at night (e.g.: pool pump). It pulls 0W for a while, I don't want my interface to show a big yellow error during that time because the sensor no longer exists. Even the 0V is not a good idea because we can use it to indicate the breaker has tripped.

Hopefully it would be accepted :-)
2019-02-05 11:26:28 +01:00
..
2019-02-04 09:57:22 -08:00
2019-02-02 14:12:23 -08:00
2019-02-05 11:12:09 +01:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-03 15:24:46 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-05 11:12:09 +01:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-02-02 14:12:23 -08:00
2019-01-26 16:33:11 +01:00
2019-02-02 14:12:23 -08:00
2019-01-13 09:38:22 -08:00
2019-01-29 07:42:38 -08:00
2019-01-14 08:44:30 +01:00
2019-02-04 09:57:22 -08:00
2019-01-30 17:09:56 +01:00
2019-01-24 08:20:20 +01:00
2019-01-01 15:35:31 +01:00
2018-12-06 11:54:44 +01:00