Zac Hatfield Dodds e00e6f9db6 Bom weather platform (#5153) ...

* Fix typo

* Auto-config for `sensor.bom`

Deprecate (but still support) the old two-part station ID, and move to a
single `station` identifier.  Any combination of these, including none,
is valid; most results in downloading and caching the station map to
work out any missing info.

* Add `weather.bom` platform

Very similar to `sensor.bom`, but supporting the lovely new `weather`
component interface.  Easier to configure, and does not support the
deprecated config options.

* Review improvements to BOM weather

Largely around better input validation.

2017-01-15 12:12:50 +01:00

..

__init__.py

Bugfix default values to timedelta (#5193)

2017-01-06 00:16:12 +01:00

apcupsd.py

…

api_streams.py

Have api_streams sensor also monitor websocket connections (#4668)

2016-12-02 18:17:46 -08:00

arduino.py

Migrate to voluptuous (#3737)

2016-10-11 00:56:57 -07:00

arest.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

arwn.py

Clean-up (#4894)

2016-12-15 22:12:33 -08:00

bbox.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

bitcoin.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

bloomsky.py

Fix bloomsky platform discovery (#3303)

2016-09-10 09:12:24 -07:00

bom.py

Bom weather platform (#5153)

2017-01-15 12:12:50 +01:00

broadlink.py

Broadlink fix (#5065)

2017-01-03 23:45:11 +01:00

coinmarketcap.py

Avoid TypeError for state (#4897)

2016-12-15 22:14:59 -08:00

command_line.py

Bugfix default values to timedelta (#5193)

2017-01-06 00:16:12 +01:00

cpuspeed.py

…

cups.py

CUPS sensor (#4142)

2016-11-03 09:31:50 +01:00

currencylayer.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

darksky.py

Setup DarkSky platform when offline during init (#4919)

2016-12-15 22:27:37 -08:00

demo.py

…

deutsche_bahn.py

Upgrade schiene to 0.18 (#4359)

2016-11-12 12:30:05 -08:00

dht.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

dovado.py

Support for Dovado routers (#4176)

2016-11-02 21:20:21 -07:00

dsmr.py

Dsmr hourly gas usage. (#4609)

2016-12-03 20:45:42 -08:00

dte_energy_bridge.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

dublin_bus_transport.py

[sensor] Add Dublin bus RTPI sensor (#5257)

2017-01-13 19:15:46 +02:00

dweet.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

ecobee.py

…

efergy.py

Extending efergy component for get the amount of energy consumed (#4202)

2016-12-01 22:00:17 -08:00

eliqonline.py

Bugfix default values to timedelta (#5193)

2017-01-06 00:16:12 +01:00

emoncms.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

enocean.py

Fix broken EnOcean support (#4710)

2016-12-05 08:15:36 -08:00

envisalink.py

Added a dispatch call to the envisalink sensor to also get partition status updates.

2016-09-26 20:13:41 -07:00

fastdotcom.py

add manual option to prevent scheduled tests. (#4906)

2016-12-15 22:55:51 -08:00

fitbit.py

Reorganize HTTP component (#4575)

2016-11-25 13:04:06 -08:00

fixer.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

fritzbox_callmonitor.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

glances.py

Remove globally disable pylint issue (#4565)

2016-11-24 12:25:01 +01:00

google_travel_time.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

gpsd.py

Upgrade gps3 to 0.33.3 (#3222)

2016-09-06 08:53:21 -06:00

gtfs.py

Remove GTFS default name & string change

2017-01-13 14:02:00 -08:00

haveibeenpwned.py

Update docstrings (sensor.pi_hole, sensor.haveibeenpwned) (#3793)

2016-10-10 19:38:32 +02:00

hddtemp.py

Remove globally disabled pylint warnings (#4204)

2016-11-03 18:40:43 -07:00

homematic.py

Homematic update with HomematicIP/HomematicWired support and multible… (#4568)

2016-11-29 20:53:02 +01:00

hp_ilo.py

Upgrade python-hpilo to 3.9 (#4482)

2016-11-21 17:31:14 +01:00

hydroquebec.py

Add HydroQuebec support (#4840)

2016-12-18 12:23:10 +01:00

imap_email_content.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

imap.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

influxdb.py

Influxdb sensor state set to unknown if query return no points (#4148)

2016-11-02 19:50:18 -07:00

ios.py

iOS links (#4295)

2016-11-08 00:07:24 +01:00

iss.py

Add sensor for International Space Station (#4968)

2016-12-26 16:02:11 +01:00

isy994.py

Re-enabled Weather Sensors for the ISY component. (#5148)

2017-01-05 23:33:52 +01:00

knx.py

Fixed unit_of_measurement functionality for knx sensor (#4594)

2016-11-27 12:21:05 -08:00

lastfm.py

Make services yield (#4187)

2016-11-03 18:32:14 -07:00

linux_battery.py

Upgrade batinfo to 0.4.2 (#4452)

2016-11-18 22:04:15 -08:00

loopenergy.py

Bump pyloopenergy to catch SSL exception.

2017-01-02 14:15:38 +00:00

mfi.py

Use setup_component in tests (#3414)

2016-09-17 10:29:58 -07:00

mhz19.py

Maintenance 2nd (#4106)

2016-10-30 09:58:34 +01:00

miflora.py

upgrade miflora (#5075)

2016-12-27 09:24:05 +01:00

min_max.py

New config parameter for min_max sensor to specify number of digits for rounding mean value (#4237)

2016-11-22 15:36:29 +01:00

modbus.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

mold_indicator.py

Fixes moldindicator sensor after switch to asyncio (#5038)

2016-12-30 11:16:34 +01:00

mqtt_room.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

mqtt.py

Migrate callbacks to use schedule_update_ha_state (#4426)

2016-11-17 07:34:46 -08:00

mysensors.py

Add discovery notify support and mysensors notify (#5219)

2017-01-15 03:53:14 +01:00

neato.py

Neato Fixes (#4490)

2016-11-21 19:36:44 -08:00

nest.py

Nest fixes (#5011)

2016-12-22 20:22:07 +01:00

netatmo.py

Netatmo improving Battery info (#4724)

2016-12-11 14:47:27 -08:00

netdata.py

Netdata sensor (#4743)

2016-12-05 11:19:20 +01:00

neurio_energy.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

nut.py

Add support for NUT (Network UPS Tools) sensor. (#4551)

2016-12-01 08:58:16 +01:00

nzbget.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

octoprint.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

ohmconnect.py

…

onewire.py

Improve 1-Wire device family detection and error checking. Use volupt… (#3233)

2016-09-06 14:50:02 -06:00

openexchangerates.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

openweathermap.py

Upgrade pyowm to 2.6.0 (#5071)

2016-12-26 16:31:26 +01:00

pi_hole.py

Update docstrings (sensor.pi_hole, sensor.haveibeenpwned) (#3793)

2016-10-10 19:38:32 +02:00

pilight.py

Use voluptuous for Pilight switch (#3819)

2016-10-31 13:18:47 +01:00

plex.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

pvoutput.py

Fix docstring (#4564)

2016-11-24 10:15:00 +01:00

random.py

Async cleanups with new handling and executor (#4234)

2016-11-06 01:01:03 +01:00

rest.py

Added tests for REST sensors (#4115)

2016-10-30 21:51:03 -07:00

rfxtrx.py

Fix wrong name handling in rfxtrx sensor (#4531)

2016-11-22 12:47:37 -08:00

sabnzbd.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

scrape.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

sensehat.py

Remove and update docstrings (#4969)

2016-12-18 11:39:33 +01:00

serial_pm.py

Maintenance 2nd (#4106)

2016-10-30 09:58:34 +01:00

sleepiq.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

sma.py

[sensor/sma] SMA Solar Inverter sensor (#5118)

2017-01-09 21:35:47 +01:00

snmp.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

sonarr.py

Add support for the Sonarr URL Base setting (#4975)

2016-12-18 10:05:05 -08:00

speedtest.py

Upgrade speedtest-cli to 1.0.1 (#5073)

2016-12-26 16:41:18 +01:00

statistics.py

Async cleanups with new handling and executor (#4234)

2016-11-06 01:01:03 +01:00

steam_online.py

Make services yield (#4187)

2016-11-03 18:32:14 -07:00

supervisord.py

Make services yield (#4187)

2016-11-03 18:32:14 -07:00

swiss_hydrological_data.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

swiss_public_transport.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

synologydsm.py

Fix synologydsm (#4895)

2016-12-15 22:13:38 -08:00

systemmonitor.py

Upgrade psutil to 5.0.1 (#5072)

2016-12-26 16:31:44 +01:00

tcp.py

Fix TCP sensor to correctly use value_template (#5211)

2017-01-11 17:26:29 +01:00

ted5000.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

tellduslive.py

Telldus Live: (#4645)

2016-12-11 21:39:37 -08:00

tellstick.py

Refactor tellstick code (#4460)

2016-11-22 21:48:22 -08:00

temper.py

TEMPer component: reset devices on address change (#4596)

2016-11-27 22:01:13 -08:00

template.py

Async cleanups with new handling and executor (#4234)

2016-11-06 01:01:03 +01:00

thinkingcleaner.py

Maintenance 2nd (#4106)

2016-10-30 09:58:34 +01:00

time_date.py

Async cleanups with new handling and executor (#4234)

2016-11-06 01:01:03 +01:00

torque.py

Reorganize HTTP component (#4575)

2016-11-25 13:04:06 -08:00

transmission.py

…

twitch.py

Make services yield (#4187)

2016-11-03 18:32:14 -07:00

uber.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

usps.py

usps sensor: better delivery handling (#5202)

2017-01-08 14:35:14 +01:00

vasttrafik.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

vera.py

Maintenance 2nd (#4106)

2016-10-30 09:58:34 +01:00

verisure.py

Use voluptuous for Verisure (#3169)

2016-09-06 18:18:34 -07:00

waqi.py

Update throttle and add more attributes (#4644)

2016-12-01 22:15:48 -08:00

wink.py

Wink PubNub v4 (#4561)

2016-11-30 13:12:26 -08:00

worldclock.py

Async cleanups with new handling and executor (#4234)

2016-11-06 01:01:03 +01:00

wunderground.py

Fixes issues #4844 to avoid traceback when self.rest.data is None (#4886)

2016-12-13 23:01:14 -08:00

xbox_live.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

yahoo_finance.py

Upgrade yahoo-finance to 1.4.0 (#4483)

2016-11-21 17:25:43 +01:00

yr.py

[WIP] Spread the traffic to yr.no servers and remove yr.no from the default… (#5171)

2017-01-04 23:20:30 +01:00

yweather.py

Disable too-many-* (#4107)

2016-10-30 22:18:53 +01:00

zamg.py

Move details to docs, update doc strings, and use consts (#4777)

2016-12-06 15:49:59 +01:00

zigbee.py

Remove ThreadPool with async executor (#4154)

2016-11-05 09:27:55 -07:00

zoneminder.py

zoneminder: Support excluding archived events (#4445)

2016-12-01 22:17:38 -08:00

zwave.py

[zwave]Use schedule_ha_state and add debug message (#5143)

2017-01-02 18:55:56 +01:00