* Allow configuring DSMR5 protocol.
* Give good example.
* Using dev branch until released upstream.
* Update to dsmr_parser supporting v5 arguments.
* Update to latest dmsr parser, preventing exceptions thrown where warnings would suffice.
* Update even more
* Update requirements.
* Update requirements
* Revert "Update to dsmr_parser supporting v5 arguments."
This reverts commit 3567de4b90361c262c4d3261325c2b7dbfa5441f.
* Revert "Using dev branch until released upstream."
This reverts commit 53e8de112cb0c47ac5031aacd74a5b18b4a418e2.
* Revert "Give good example."
This reverts commit 4f90fc4be677634fc7e951b4b79aa57c8213b8f8.
* Revert "Allow configuring DSMR5 protocol."
This reverts commit 9fa0e14187e32521e2f51cf2183a9070ee093bd0.
* Revert "Update to dsmr_parser supporting v5 arguments."
This reverts commit 3567de4b90361c262c4d3261325c2b7dbfa5441f.
* Revert "Using dev branch until released upstream."
This reverts commit 53e8de112cb0c47ac5031aacd74a5b18b4a418e2.
* Revert "Give good example."
This reverts commit 4f90fc4be677634fc7e951b4b79aa57c8213b8f8.
* Revert "Allow configuring DSMR5 protocol."
This reverts commit 9fa0e14187e32521e2f51cf2183a9070ee093bd0.
* Initialize sun with unknown values.
Initial values should be `unknown` instead of `0`. Otherwise on HA restart the value of `0` is pushed to metrics databases (graphite/influx/recorder).
* Update sun position before emitting initial update
* Simplify based on armills comment.
* Use provided time for calculation.
* Value of 0 should not be considered `unknown`.
* Reflect disconnect state in entity states.
* Due to adding unknown state on disconnect, the amount of reconnects can sometimes be more. Test for at least 2 reconnect attempts.
* Add support for group commands (allon/alloff).
Add 'group_aliasses' config attribute that only respond to group commands.
Add nogroup_aliases that only respond to 'on' 'off' commands.
Allow settings device id group behaviour.
* Fix linting.
* Fix lint.
Current implementation of connection status doesn't follow convention and is not properly configurable. Might be added again in the future as a full fledged entity or some other way.
For now users can rely on error logging to determine connection status.
* Reconnect robustness, expose connection state.
- Expose connection status as rflink.connection_status state.
- Handle alternative timeout scenario.
- Explicitly set a timeout for connections.
- Error when trying to send commands if disconnected.
- Do not block component setup on gateway connection.
* Don't use coroutine where none is needed.
* Test disconnected behaviour.
* Use proper conventions for task creation.
* Possibly fix test race condition?
* Update hass import style
* Prevent events about MQTT messages received to cause infinite loop when two HA instances are crossconfigured for mqtt_eventstream.
* Fix linting
* Publish all MQTT received events except incoming from eventstream. Also make it configurable.
* Prevent events about MQTT messages received to cause infinite loop when two HA instances are crossconfigured for mqtt_eventstream.
* Fix linting
* Publish all MQTT received events except incoming from eventstream. Also make it configurable.
* Initial sketches of rflink component.
* Add requirement.
* Properly load configuration.
* Bump rflink for graceful parse errors and protocol callback.
* Cleanup, documentation and linting.
* More documentation, first sensor implementation (temp & hum).
* Add brightness/dim support for newkaku protocol.
* Use separate class for dimmables.
* Make sure non-dimmable newkaku devices are turned on.
* Move some code around, add switches. Support loading from config.
* Fix bug in ignoring devices.
* Fix initial state assumption.
* Improve reliability on invalid conditions.
* Allow configuration of group for new devices.
* Sensor icons.
* Fix parsing negative numbers.
* Correct icon.
* Allow sending commands serial.
* Pluralize.
* Allow adding sensors from config.
* Fix ignoring devices and bugs in previous commit.
* Share know devices so devices from configuration don't get added as lights.
* Lookup unit from value_key.
* Remove debug.
* Start implementing event protocol in place of packet protocol.
- Added first test suite for sensors.
- This currently breaks light and switch.
* Refactor switch component to fit new rflink changes. Add test suite.
* Fix style.
* Refactor and test lights. Bring coverage to 100%.
* Use non-broken and production tested rflink module.
* Update requirements.
* Bump for logging.
* Improve readability.
* Do not use global variable but keep known device state in intended place.
* Improve docs.
* Make icon support generic.
* Disable overriding icons in config, as it belongs in customization. Only keep custom icon for entities that are able to detect a icon based on the thing they represent (sensors in this case).
* Implement configuration schema, overall refactor of magic values.
* Fix bug in config/test wait_for_ack.
* Small refactors.
* Move command logic into separate class.
* Convert command sending logic to class based pattern instead of using the event bus.
* Start not using bus for rflink event propagation to platforms.
* Do not use event bus for all entity types.
* Fire an event on the bus for every switch incoming rflink command.
* Resolve lint errors, remove some old code.
* Known devices no longer need to be registered separately.
* Log bus events.
* Event callback is a..... callback.
* Use full entity id for events.
* Move event sending to entity.
* Log incoming events.
* Make firing events optional inline with rfxtrx.
* Add foundation for signal repetition.
* Add signal repetition config and tests.
* Make plain switchable type explicitly configurable.
* Enable default entity settings for automatically added entities as well.
* Prevent default configuration leaking accross entities.
* Make sure device defaults don't get overwritten by defaults further down.
* Don't let fast state switching and repetitions turn your house into a disco.
* Make repetitions more responsive.
* Disable on/off fallback on dimmables as it currently doesn't play nice with repetitions.
* Use rflink that allows send_command_ack to be safely cancelled.
* Reduce duplication and make repeat work for non-ack.
* Implement reconnection logic.
* Improve reconnection logic.
* Also cancel repetitions when entity state is changed due to external command.
* Update requirements.
* Fix linting.
* Fix spelling.
* Don't lie.
* Fix lint.
* Support for automatically creating protocol translation (fixes spaces in device names).
* Returned support for dimmable and on/off entity.
* Duplicate code to fix linting issues with inheritance.
* Allow overriding unit of measurement from config.
* Add MAC vendor lookup for device_tracker.
* Test vendor mac lookup and fix device attribute.
* Generate requirements.
* Style.
* Use hyphen instead of underscore to satisfy 'idna'.
https://github.com/kjd/idna/issues/17
* Resort imports.
* Refactor macvendor to use macvendors.com API instead of netaddr library.
* Test vendor lookup using macvendors.com api.
* Remove debugging.
* Correct description.
* No longer needed.
* Device tracker is now an async component. Fix ddwrt tests.
* Fix linting.
* Add test case for error conditions.
* There is no reason to retry failes vendor loopups as they won't be saved to the file anyways at that point.
* Sorry, bad assumption, this only made things worse.
* Wait for async parts during setup component to complete before asserting results.
* Fix linting.
* Is generated when running 'coverage html'.
* Undo isort.
* Make aioclient_mock exception more generic.
* Only lookup mac vendor string with adding new device to known_devices.yaml.
* Undo isort.
* Revert unneeded change.
* Adjust to use new websession pattern.
* Always make sure to cleanup response.
* Use correct function to release response.
* Fix tests.
* Add channel switching for philips tvs.
* Disable track buttons when not watching tv.
* Undo isort config.
* Yes it does.
* Just testing some assumption on hound's flake8 behaviour.
* Revert "Just testing some assumption on hound's flake8 behaviour."
This reverts commit ff9940b39e2c68785287c8567bf4862a4a49fe78.
* poke
* Expose isort preferences for tools.
* Adhere to pylints sorted imports requirement.
* More documentation, set typing in between stdlib and 3rd party.
* Initial implemenation of DSMR component.
* Fix linting
* Remove protocol V2.2 support until merged upstream.
* Generate requirements using script.
* Use updated dsmr-parser with protocol 2.2 support.
* Add tests.
* Isort and input validation.
* Add entities for gas and actual meter reading. Error handling. Use Throttle.
* Implement non-blocking serial reader.
* Improve logging.
* Merge entities into one, add icons, fix tests for asyncio.
* Add error logging for serial reader.
* Refactoring and documentation.
- refactor asyncio reader task to make sure it stops with HA
- document general principle of this component
- refactor entity reading to be more clear
- remove cruft from split entity implementation
* Use `port` configuration key.
* DSMR V2.2 seems to conflict in explaining which tariff is high and low.
http://www.netbeheernederland.nl/themas/hotspot/hotspot-documenten/?dossierid=11010056&title=Slimme%20meter&onderdeel=Documenten
> DSMR v2.2 Final P1
>> 6.1: table vs table note
Meter Reading electricity delivered to client normal tariff) in 0,01 kWh - 1-0:1.8.1.255
Meter Reading electricity delivered to client (low tariff) in 0,01 kWh - 1-0:1.8.2.255
Note: Tariff code 1 is used for low tariff and tariff code 2 is used for normal tariff.
* Refactor to use asyncio.Protocol instead of loop+queue.
* Fix requirements
* Close transport when HA stops.
* Cleanup.
* Include as dependency for testing (until merged upstream.)
* Fix style.
* Update setup.cfg
Johan Bloemberg